New GX11 Series Grinder Mixer

Frontier Implements
Key Features
  • Banded V-belt
  • Self-contained hydraulic system
  • 7-ft intake auger
  • 14-in. vertical mixing auger
  • 12-ft. hydraulic unloading auger

More Info


Hammer mill with four-way reversible steel-alloy hammers
Hammer mill with hammers shownHammer mill with hammers shown
Hammer mill with door closedHammer mill with door closed

The 53-cm (21-in.) hammer mill has 66 thin, four-way reversible steel-alloy hammers that slice the material.

As slicing occurs, a suction fan draws ground feed through the 600-cu in. screen area and allows a uniform mix. This mill and hammer design also reduces horsepower requirements.

35.6-cm (14-in.) vertical mixing auger with 76.2-cm (30-in.) base
Vertical mixing augerVertical mixing auger

The 35.6-cm (14-in.) vertical mixing auger with a 76.2-cm (30-in.) base is designed to thoroughly mix the ground feed and supplements.

Mixing is accurate and consistent load after load.

Self-contained hydraulic system
Hydraulic motor and reservoirHydraulic motor and reservoir
Hydraulic hose holderHydraulic hose holder

The self-contained hydraulic system drives all of the feeding attachments and unloading mechanisms. The hydraulic system is supplied by a hydraulic motor with 39.75-L/min (10.5-gpm) flow. A cyclonic reservoir provides circulation to cool the hydraulic oil.

3.7-m (12-ft) hydraulic unloading auger is standard equipment
Unloading auger extendedUnloading auger extended
Adjustable slip clutchAdjustable slip clutch
Unloading auger shutoff doorUnloading auger shutoff door

The 3.7-m (12-ft) hydraulically controlled unloading auger is standard equipment. It has a reach height of 19 ft at 53 degrees, can rotate 300 degrees, and is controlled from the tractor's operator station.

An adjustable slip clutch for the unloading auger rotation provides protection against impact with a building or bin.

A manually operated, slide-style door opens easily for unloading.

Hammer mill screens and screen storage
Twelve hammer mill screens availableTwelve hammer mill screens available
Screen storageScreen storage

Twelve hammer mill screens are available as attachments for the grinder mixer. Sizes range from 3.175 mm to 50.8 mm (0.125 in. to 2 in.).

Screens are stored on the left side of the machine.

Large, 135-bu (170-cu ft) mixing chamber
135-bu (170-cu ft) capacity135-bu (170-cu ft) capacity

Big capacity means fewer loads to be ground, mixed, and delivered to feeders and bins.

Auger extensions
The 0.9-m (3-ft) unloading auger extensionThe 0.9-m (3-ft) unloading auger extension
The 1.8-m (6-ft) unloading auger extensionThe 1.8-m (6-ft) unloading auger extension

Unloading auger extensions are available in 0.9-m and 1.8-m (3-ft and 6-ft) lengths and are folded manually.

Banded V-belt and mill disconnect
PTO drive with banded V-beltPTO drive with banded V-belt
Quick-release pin to disengage millQuick-release pin to disengage mill

The GX1117 is available with a 540-rpm power take-off (PTO) or 1000-rpm PTO. The hammer mill is powered with an eight A-section-banded V-belt for a positive drive.

The drive also features a quick-release pin to disengage the hammer mill.

Gravity feed hopper with magnets catches metal debris
Gravity feed hopper shownGravity feed hopper shown
Two 102-mm x 457-mm (4-in. x 18-in.) magnets shown Two 102-mm x 457-mm (4-in. x 18-in.) magnets shown

A gravity feed hopper with two heavy-duty 102-mm x 457-mm (4-in. x 18-in.) magnets catches metal debris.

Supplement hopper with sack cutter
Supplement hopperSupplement hopper
Ergo height for ease of loadingErgo height for ease of loading

The supplement hopper is located on the left side of the grinder mixer. It is 58.4 cm wide and 45.7 cm long (23 in. wide and 18 in. long) and equipped with a sack cutter. The mouth opening is 88.9 cm (35 in.) above the ground.